Importance of Using Rife Frequencies for Treating Cancer

 Dr. Royal Raymond Rife used a single tube frequency device to spread the cancer virus many times faster than normal. Low power frequency energy from single tube devices such as rifles used in their laboratories increases blood circulation and enhances microscopic mechanisms in organisms that aim to deliver rife frequencies.

The BCX811 compact, briefcase and professional ray-tube devices address this issue by providing dramatically more power than what was used to grow cancer. This creates a vortex between the two tap tubes used in the product design, so that the design with a square of spacing in a single tube design does not reduce the vortex density. In the area between the tubes the energy density or power is relatively constant and is significantly reduced as the distance from the tube increases compared to the single tube design. Consequently, when the frequency is right and the duration is sufficient, microorganisms have a lot of power to stimulate destruction.

Parameters of rife frequencies

There are three parameters that determine the effectiveness of a session used to destroy microbes in the body; Freedom, strength and dedication. If one or more of these are not enough, the microbes will not be destroyed. If it targets the resonant system in microorganisms with insufficient organisms of energy, it may also become active. However, to some extent it is possible to compensate for weak parameters by adding others. For example, sometimes less power can be compensated for a growing period. In contrast, when BCX411 devices are used at full power, the duration can be shorter. And, when the rife frequencies are not quite right, the power and / or duration can be increased to compensate.

Limitations of rife frequencies

Often, it is important to limit the number of microorganisms destroyed at any given time in order to limit the reaction and detoxify it. In this case option 1 is. Limit the number of frequencies provided; 2. Reducing power to less than maximum; And 3. reducing the duration of the session. If power and / or duration are chosen to be limited, there is always a risk of stimulating the microorganism that is targeted because there is not enough energy to destroy it. Remember, the frequency is chosen to target and influence a particular microorganism. If the frequency is right, it will activate metabolic functions, move the fluid inside, or shake it until it activates or destroys. A better option is to limit the frequency, not the power or duration.

Power of rife frequencies

How much power is there? BCX411 devices do not damage healthy tissue at any power level. It just doesn’t have enough power to damage any part or function of the body. It only works by the principle of sympathetic resonance. Microbes are targeted with frequency by killing them with their natural resonance frequency. Then it doesn’t take hundreds of votes to destroy. Available in BCX411 products, the energy level is required to destroy microorganisms more than ten times, however, less than one tenth will harm certain mammals.

The only danger of using the frequency technique is that it is being used very aggressively destroying a lot of microbes quickly. There is no danger of using too much power as there is not enough power that can be harmful to normal tissues. Power is important because it works with frequency and duration as well as technology. Remember, plasma tubes have less electricity that carries energy to the body. Thus, there should be enough power to cover the whole body, so that the micro-organisms are utterly destroyed, and not just stimulated.

A Frequently Asked Question (FAQ) page contains a list of questions and answers to our products.